HY-H2GOS-Starter
Wind Solar Hybrid Street Light
Solar Street Lighting
Wind Solar Hybrid Off-grid Sys
Controller & Inverter
Tower & Pole
HY-H2GOS-Starter
HY-H2GOS-Starter
HY-H2GOS-Starter 2KW Wind Solar Hybrid Off-grid System
System Configuration:
● Wind Power: 1000W rated power output - HY-1000 Wind turbine, 48V
● Solar Power: 1000W rated power output - 4pcs 250W 24V polycrystalline solar panel
● Controller & Inverter: off-grid wind solar hybrid controller inverter 1000W
● Wall fixation tower 3 meter tower for 1000w wind turbine
● Rooftop solar panel installation bracket for 1000W PV
Estimated System Yearly Power Production (KWH) - solar and wind combined
Remarks: solar power production is estimated based on areas with class II solar resources (yearly sunshine 3000-3200hrs, radiation level 6570-7621MJ/㎡), wind power production is estimated based on annual average wind speed at 10 meter high free-standing tower installation, you may input your project site latitude & longitude at following website, so you can get more accurate figure of your local wind and solar resources.
Recommended Application:
● Simple cottage with 300-400 bedrooms, providing very basic power for total load less than 5000W.
● Ideal solution for areas with stable public grid supply to reduce your electricity bill.
● Ideal solution for areas with unstable public grid supply as a reliable power backup system.
● Areas completely without public grid supply, HY-H12GOS system could serve as a stand-alone power supply system, such as remote area or holiday cottage.
● Ideal solution for areas with stable public grid supply to reduce your electricity bill.
● Ideal solution for areas with unstable public grid supply as a reliable power backup system.
● Areas completely without public grid supply, HY-H12GOS system could serve as a stand-alone power supply system, such as remote area or holiday cottage.
System Installation Requirement:
● Rooftop solar panel installation requires minimum 8 square meters, south-facing steep roof is recommended for better solar power harvesting
● Open space without tall obstacle is preferred for wind turbine installation for better wind power harvesting.
● 2-3 square meter storage room is preferred to place controller inverter system and batter bank.
System Detail | HY-H2GOS-Starter |
Rated Capacity | 2000W |
Wind turbine | HY-1000 48V, 5 blade |
PV modules | 250W (24V) x 4 |
Wind Solar Hybrid off-grid controller Inverter | input: 1000W wind/1000W solar |
Output: 1000W 110-240Vac 50/60hz | |
Grid by-pass switch: optional | |
Deep Cycle battery AGM gel | 150AH x 4 |
PV module mounting bracket | flat roof/tile roof/corrugated Metallic roof/ground mount |
Suggested Tower installation | HY-WF10 (3m) for wall fixation installation |
HY-FRK10 (4m) for flat roof installation | |
HY-HT15-10.4P3 hydraulic tower 10.4 meters |
Recommended household electric appliance-HY-H2GOS-Starter
Remarks:
1. System inverter is designed with total capacity 1000W, which means total load capacity of the house should be no more than 1000W, inverter will automatically shut done if instant load over 1000W to for system self-protection, so we suggest end user estimate your own house total load capacity then select the proper inverter system.。
2. Above household daily power consumption is calculated based on a typical usage of an ordinary household for end user reference only.
3. Air conditioner is not recommended for this system because air conditioner is a high power consumption unit which consumes 5-8KWH, if the house has to be equipped with air conditioner, we suggest supply the power for air conditioner from public grid.
4. There is an optional by-pass switch which could automatically switch to public grid power when there is not enough power in battery bank, this is only applicable to the area with public grid connection.